DJ Pricing: How to Price Your Packages, Overtime and Add-Ons
Published · By the LaunchKit team · How these guides are written
Our guides are educational only, not legal, tax, or accounting advice. Rules vary by state and locality, so confirm the details with the agency that covers your area.
TL;DR: A cocktail hour and a four-hour reception can add up to an eleven-hour working day once you count planning calls, load-in, sound check, teardown and the drive. Price DJ packages from that whole day: an hourly rate built from your real costs, gear wear per event, any assistant's pay, then your margin. Put overtime, add-ons and deposit terms in writing before the date is held.
Why five hours of music is a full working day
Couples and event planners book the hours they hear music. You work a much longer day: the planning call, timeline emails, loading the vehicle, load-in, sound check, the performance, teardown and the drive back once the dance floor empties.
Price only the performance and every booking pays you less than you think. Price the whole day and your packages start to make sense.
The five numbers behind a DJ quote
- Your hourly rate. What one working hour has to bring in.
- Whole-day hours. Planning, load-in, setup, performance, teardown and travel.
- Gear wear. Speakers, subs, lights, mics and controllers wear out and need replacing.
- Help. An assistant or second DJ for setup, a photo booth or a second room.
- Add-ons. Ceremony sound, uplighting, a photo booth, extra hours.
Step 1: Set your hourly rate
List everything the business costs you in a month: gear payments and repairs, vehicle costs, insurance, music services and software, marketing, your phone and the pay you need. Count the money you put aside for taxes as a cost, too.
Divide by the hours you actually work on bookings, counting planning and load-in, not just hours behind the decks. These are round example figures; swap in your own.
- What a month costs, including your pay: $4,500
- Working hours on bookings: 90
- Rate: $4,500 ÷ 90 = $50 per hour, before profit
For a longer walk-through of cost-first pricing, see our guide to pricing small-business services.
Step 2: Count the whole day for each package
Time three or four real bookings from the first call to unloading at home. Write down each stage:
- Planning calls, the timeline and the do-not-play list
- Load-in, setup and sound check
- Performance, including ceremony or cocktail hour if you cover them
- Teardown and load-out
- Driving both ways
Go by a normal night, not your fastest load-out. A ballroom with a loading dock and a barn with a long walk from the parking lot are different jobs.
Step 3: Add gear wear, help and add-ons
Your rig has a working life. Put a replacement price on the main speakers, lights and controller, then divide by the number of events you expect them to survive. A $6,000 rig expected to last 150 events means $40 per event set aside for replacement.
Count the backup controller, spare mics and cables in that replacement price too; they age even when they stay in the case.
Then give help and add-ons their own lines: an assistant's hours, a photo booth's prints, props and attendant, ceremony sound with its second setup and wireless mics. Separate lines show a couple what each extra adds, and stop a popular add-on from quietly eating your profit.
If you pay an assistant or a second DJ, the IRS page on independent contractors and employees explains how to tell which they are. Ask your tax preparer to confirm.
A worked example: a wedding reception package
A Saturday wedding with a cocktail hour, a four-hour reception and an assistant. The figures are round and illustrative, so plug in yours.
- Planning calls and timeline: 2 hours
- Load-in, setup and sound check: 2 hours
- Performance (cocktail hour plus reception): 5 hours
- Teardown and load-out: 1 hour
- Driving both ways: 1 hour
- Your time: 11 hours × $50 = $550
- Assistant, setup through load-out: 8 hours × $20 = $160
- Gear wear: $40
- Subtotal: $750
- Margin at 20%: $750 × 1.2 = $900
Five hours of music, eleven hours of your day. That gap is why pricing per hour of music tends to come out too low.
Overtime gets its own figure. One extra hour of you and the assistant costs $50 + $20 = $70, and with the same 20% margin that is $84. Round to $85 an hour, and agree it in writing before the date.
What to put in writing
Before you hold a date, write down:
- Date, venue, start and end times, load-in time and venue access
- Hours of music and what counts as overtime
- Every add-on by name, with its price
- The deposit, the balance and when it's due
- What happens if the event is canceled or postponed
- Who provides power, a table and cover for outdoor setups
Booking terms belong in your own agreement. Have an attorney review it, especially the cancellation section.
Your first month: what to set up
- Set your rate from expected costs, then correct it after your first few gigs.
- Start a gear-wear reserve from the first booking, even a small one.
- Decide deposit and overtime terms before anyone asks, and time every gig this season.
Local rules to check
Ask your city or county about a business license, and check with your state's licensing office whether anything else applies. The SBA's licenses and permits section is a sensible first stop, and our licenses and permits guide lays out where to look next.
For outdoor events in parks or public spaces, ask who is getting any permit for amplified sound: you, the client or the venue. Some venues ask vendors for proof of insurance, so ask when you book. The SBA's business insurance page covers the main types.
Long drives to venues add up over a season. If you track vehicle costs by the mile, see the IRS page on standard mileage rates; your tax preparer can tell you whether that or actual vehicle expenses suits you better.
Tools that help
The DJ Pricing Calculator ($14.99) is a single Excel workbook with 8 tabs. On the Service Pricing tab you enter your rate, the planning and performance hours behind each package, and the costs behind a photo booth.
Each booking comes together in the Quote Builder, travel and deposit included, and the Quote Output sheet is what the couple sees. Bookings and gear spending go on the Job Log and Expenses tabs, and the Dashboard tracks monthly revenue against your target. A DJ service list gets you started, and its example hours and prices are meant to be replaced with yours.
Once your packages are priced, the DJ Price List & Service Menu ($4.99) is where they go. It's a US Letter layout of 12 service rows under 4 categories, with Core Performance, Interactive Entertainment and Audio Support among them.
It arrives as editable HTML and Word versions plus a How-to-Use Guide PDF. Once your prices are in, save a PDF to send after the first call.
FAQ
How much should a DJ charge per hour?
That depends on your costs and hours, not a going rate. Build your rate from what the business costs each month and the hours a booking really takes, including planning, load-in and travel, then price packages from it.
Is it better to charge hourly or by the package?
Packages are easier for couples to compare side by side. Build each package from your hourly rate and whole-day hours, then use an hourly figure for overtime.
How do I handle overtime on the night?
Agree an hourly overtime figure in writing before the date, built from your rate, any assistant's pay and your margin. When the couple asks for one more hour, log it so the final bill and your records agree.
Should I take a deposit?
A held Saturday is a date you can't sell to anyone else, and a deposit protects it. Write the amount, the balance due date and what happens if the event is canceled into your agreement.
Sources
Checked November 18, 2026.
- SBA, "Apply for licenses and permits"
- SBA, "Get business insurance"
- IRS, "Standard mileage rates"
- IRS, "Independent contractor (self-employed) or employee?"
This is general information, not legal, tax or financial advice. Licensing, permit and insurance rules vary by state, county and city. Check your local requirements.
Related LaunchKit products