Interior Designer Fee Schedule: How to Set Hourly, Flat and Per-Room Fees
Published · By the LaunchKit team · How these guides are written
Our guides are educational only, not legal, tax, or accounting advice. Rules vary by state and locality, so confirm the details with the agency that covers your area.
TL;DR: Every flat or per-room design fee is an hourly rate underneath. Set your rate from your real costs and time each phase of a project, from consultation to site visits. Then choose how to charge: hourly, flat, per room or in phases. Decide how you handle client purchases before the first order, and write revision rounds into every fee.
Where design fees leak
Design fees slip in the hours clients never see: hunting for a sofa that fits a ten-foot wall, chasing a backordered light fixture, a third trip to check paint colors under evening light.
None of that shows up in a first meeting, so it rarely shows up in a first quote. A fee schedule built from your real hours puts it back.
Four ways to charge, and when each fits
- Hourly. Good for consultations, open-ended advice and sourcing on large projects. You're paid for every hour, but some clients dislike an open meter, so give an estimate for each phase.
- Flat fee per project. Good for defined work, such as a kitchen design or a lighting plan. Easy for a client to approve, as long as the scope and revision rounds are written down.
- Per room. Good for single-room packages and e-design. A client can start with one room and add more later.
- Phased. Good for whole-home projects. Quote each phase separately, and the client approves the next stage knowing what it adds.
You can mix them. However you charge, remember this: every flat fee is an hourly rate in disguise. Know the rate underneath.
Some designers also charge a percentage of the project budget. The same test applies: work out what that comes to per hour of your time.
Step 1: Set your design rate
Begin by totaling a month of costs: studio rent or your home-office share, design software, printing, finish swatches and material boards, trade memberships, insurance, mileage, marketing and the pay you need. Tax set-asides belong on the list as well.
Divide by the hours you can bill: design, sourcing, meetings and site visits, not marketing or admin. Illustrative round numbers only; your own costs and hours go here.
- Monthly costs, your pay included: $7,500
- Billable hours: 100
- Rate: $7,500 ÷ 100 = $75 per hour, before profit
The same cost-first approach is laid out in our small-business pricing guide.
Step 2: Time every phase on real projects
On two or three projects, track the hours for each phase:
- Discovery consultation and measuring
- Space planning and concept
- Selections and sourcing
- Presentation meetings
- Each revision round
- Final order list and install notes
- Site visits and contractor walk-throughs
Watch sourcing and revisions closely. They are the easiest phases to underestimate, and the ones a flat fee has to absorb.
Step 3: Decide how you handle client purchases
Furniture, lighting and fabric are a separate decision from your design fee. Three ways to set it up:
- The client buys from your list. Your fee covers the sourcing time. You carry no ordering risk.
- You order for the client. You charge a purchasing fee or a markup on cost for ordering, tracking, receiving, inspecting and handling returns, and say in your agreement who keeps any trade discount.
- A mix. You order specialty pieces and the client buys the rest.
Whichever you choose, decide who pays freight, delivery and receiving charges, and whether you collect payment for an item before you place the order. That keeps your cash out of the client's sofa.
Ordering for clients can raise sales tax questions. Ask your state's revenue department or your tax preparer before you start, and keep each project's receipts separate. Our recordkeeping checklist helps.
A worked example: a one-room design package
A living room design with one revision round. The math uses round, made-up numbers to keep it readable; use your own.
- Consultation and measuring: 3 hours
- Space plan and concept: 5 hours
- Selections and sourcing: 8 hours
- Presentation meeting: 2 hours
- One round of revisions: 3 hours
- Final order list and install notes: 3 hours
- Design time: 24 hours × $75 = $1,800
- Travel for two site visits: 2 hours × $75 = $150
- Printed boards and finish swatches: $50
- Subtotal: $2,000
- Margin at 20%: $2,000 × 1.2 = $2,400
So "Living room design, one revision round" goes on your fee schedule at $2,400, with purchasing handled separately. An extra revision round is 3 hours × $75 = $225, or $270 with margin.
Notice that sourcing is the biggest single phase. If you'd guessed four hours instead of eight, the flat fee would have come out $360 short.
How to write your fee schedule
Group your services so a client can follow them:
- Discovery and planning. Initial consultation, measuring and site visits.
- Room and technical design. Per-room packages, kitchen design, lighting plans and space plans, each with its revision rounds stated.
- Selections and sourcing. Hourly, or included in a room package, with your purchasing method named.
- Extras. Additional revision rounds, extra site visits, contractor walk-throughs and e-design for out-of-area clients.
On every row, say what's included, how many revision rounds, and what isn't included. A plain line such as "Furniture, fabric and contractor labor are not part of this fee" heads off a common misunderstanding before it starts.
Retainers and payment timing
Decide whether you take a retainer before work begins, and whether it is credited against the final invoice. For phased projects, tie each payment to a phase. Put the full terms in a design agreement that an attorney has reviewed.
Local rules to check
Rules on who can use certain interior design titles, and on design work that touches building codes, vary from place to place. Check with your state's licensing office before you settle on your title or take on that kind of work.
If a plan moves walls, wiring or plumbing, the work may need permits and licensed contractors. Ask the client's contractor or your city's building department. For a business license, begin with the SBA's overview of licenses and permits, and the SBA's page on paying taxes covers state and local tax obligations in general terms.
Tools that help
The Interior Designer Pricing Calculator ($14.99) runs in Excel, with 8 tabs. Enter your design rate once on the Service Pricing tab, then the hours behind a lighting plan, a kitchen design or space planning, plus printed drawings and other materials.
Each project phase can be built as its own quote in the Quote Builder, with travel and a deposit. Running records go on three more tabs: Job Log, Expenses and Dashboard. It handles your design fees; furniture and other goods a client buys sit outside it.
The Interior Designer Price List & Service Menu ($4.99) sets your fees out on a US Letter layout. Its 12 service rows sit in 4 categories, among them Discovery and planning, Selections and sourcing, and Room and technical design.
The fee fields start empty, so you set them as hourly, per-room or flat figures. Three files: editable HTML, editable Word and a How-to-Use Guide PDF.
For billing, the Interior Designer Business Documents — Premium pack ($19.99) holds six forms, each in a fill-online HTML version and an editable Word version. With a Getting-Started HTML guide, that's 13 files in one download.
Use the Service Log as a dated record of approvals, and the Invoice Checklist to separate design hours, purchases, freight and reimbursables before each bill. The forms are admin records, not a design agreement.
FAQ
How do interior designers charge for their work?
Hourly, flat fee per project, per room, in phases, or a mix. Whatever the format, build each fee from your hourly rate and the real hours the work takes.
Should I charge hourly or a flat fee?
Hourly suits open-ended work. Flat fees suit defined pieces of work, such as one room or a lighting plan, if you state the scope and revision rounds.
How do I charge for furniture I buy for clients?
Choose one method: the client buys from your list, you charge a purchasing fee, or you mark up the cost. Name it on your fee schedule and put the full terms in your design agreement.
How many revision rounds should a design fee include?
As many as you can absorb in the fee without losing money; one or two is a workable start. List the price of each extra round on the fee schedule.
Sources
Checked November 18, 2026.
This is general information, not legal, tax or financial advice. Licensing, title, permit and sales tax rules vary by state, county and city. Confirm what applies where you work.
Related LaunchKit products